中文 English Espana Arabia
News < Home
Information Center

[WIKIPEDIA]

QUALTY COMES FROM DETAILS

Attention to Light Design in Exhibition Hall

The role of lighting is nothing more than two. The first is environmental lighting, with the entire exhibition hall design, and the second is the lighting of exhibits, highlighting what needs to be displayed.
The first point is to make the entire exhibition hall to be suitable for light, highlight the focus, but also fit the design of the platform.
To give an example:
Such a modern style, it is to do bright, top lights like the inside of the spacecraft as irregular round, the entire atmosphere and decoration style is more appropriate.

 

 

The need to make a large screen exhibition hall, the environment will be soft light, the edge tends to dark, highlight the middle of the focus, and do not affect the viewing screen

 

 

Second, the lighting of the exhibits, such as the following showrooms, is very bright, because it is necessary to reflect the original color of the clothes. If the clothes are replaced with exhibits, it will appear to be a bit chaotic. The eyes are all things. I do not know where to look.

 

 

This sanitary Ware display is very prominent. There will be no other things to see in it. Basically, the sanitary Ware will be seen at the first sight and the emphasis will be on the highlights.

 

 

Speaking of which, do you know what the design idea is for the lighting in the exhibition hall?
In the design of the exhibition hall, using the artistic and expressive power of light, the theme of the display can be rendered, and the deep meaning of the values carried by the exhibits can be more deeply recognized by the visitors. Outside many museums, galleries, and exhibition halls, large public spaces such as commercial hotels usually require the following seven lights: basic lighting, key lighting, auxiliary lighting, level lighting, stereo lighting, lighting, and emergency safety lighting.
Because the lighting design of the exhibition hall is very professional, it is also a systematic comprehensive project. In order to become a master lighting design, in addition to the knowledge of photoelectricity and lighting design, we must also understand the relevant regulations on lighting power, safety and fire prevention, understand lighting calculation methods, and be familiar with various light sources, types of lighting and lighting methods. Learn how to construct and install lamps.

 

 

Basic lighting, also known as general lighting or overall lighting, is a basic lighting system that should be used in display space or other public spaces. Its function is to allow people in the viewing room to see the indoor facilities and passages, etc., and to be able to effectively identify objects. Most of them are evenly arranged equal or downcast light lamps, rows of grid lamps or chandeliers, luminous ceiling, and rows of beams or bands installed on the ceiling, which are used to meet the most basic visual needs.

 

 

Key lighting has a positive effect on the exposure of key products, thus enhancing the sense of space hierarchy; For example, the important display plate in the exhibition hall can refer to the sense of space and order created by the lights in the window design; In the exhibition space, auxiliary light sources are usually needed to enhance the level of space and enrich the space language. It is often necessary to use auxiliary lighting(auxiliary side rear lighting) to cooperate with key lighting, so that the key exhibits have reflective areas and shadows, thus highlighting them. Warmth tip: The brightness ratio of the key lighting and auxiliary lighting is better at 3:1 or 5:3.

 

 

Hierarchical lighting is to distinguish between the front and back of the placement of the main and secondary objects. Three-dimensional, multi-angle lighting gives the audience a full range of feelings, color and space interaction Echo, leaving a deep impression. Using light sources of different colors in different exhibition areas allows viewers to feel the layers of the exhibition area when entering different exhibition areas. This three-dimensional lighting also brings about a full range of spatial interactions.

 

 

In the display lighting, in addition to a large number of uses of practical lighting to illuminate the exhibits, some decorative lighting is sometimes used to increase the charm and interest of the display. Neon tubes are used to form some kind of decorative pattern, and different lights are used to illuminate invisible phantom colors. Decoration screen, etc.. Or using virtual reality technology to generate a certain scene, etc., will achieve a good display effect.

 

 

Three-dimensional lighting is often used for the brightness of fluorescent lamps, neon lights to embellish. In order to make the audience visually feel spacious in the exhibition hall, and at the same time to make the display of the items more attractive, lamps can be laid in different directions and at different heights in the display space.
Emergency safety lighting is also called emergency lighting, safety lighting or accident lighting. When a strong earthquake or fire occurs, when the power supply bureau stops power supply and the exhibition hall or exhibition room is dark, all spectators and staff need to safely evacuate the scene of the accident.
All public places must be equipped with a separate accident lighting system, and corridors, stairs, elevators and passages, as well as entrances and exits, must have emergency lighting. The current emergency safety and so on can be automatically lit, and can be continuously lit for 90 minutes. The rationality of emergency safety lighting should also be carefully considered by designers.

Because the lighting design of the exhibition hall is very professional, it is also a systematic comprehensive project. In order to become a master lighting design, in addition to the knowledge of photoelectricity and lighting design, we must also understand the relevant regulations on lighting power, safety and fire prevention, understand lighting calculation methods, and be familiar with various light sources, types of lighting and lighting methods. Learn how to construct and install lamps. There are too many things to learn, so it is not a single subject that can be solved. It is also necessary to study technology, audience psychology, etc. in combination with other disciplines, learn advanced lighting design concepts, and develop the good habit of recording and research.